SMOK G-PRIV3 Mod
G-PRIV 3 Mod, an all-round upgrade in both software and hardware box mod, is powered by dual 18650 batteries in series with 230W max output. Driven by a new intelligent IQ-G chipset, it will deliver fire new user interface and user experiences. And it is equipped with 2.4 inch large touch screen to show you the information you need with a simple click. It also adopts an independent button to lock/unlock the screen easily. Besides, it utilizes USB Type-C port, which will carry more power and offer faster transfer speed.
Standby current: <400μA
Power range: 1-230W (VW) / 10-230W (TC)
Input voltage: 6.4-8.4V
Output voltage: 0.5-8.2V
Firing time: 0.001s
Charging voltage: 5V
Charging current: 2.0A
Resistance range: 0.01-2.5ohm (VW) / 0.05-2ohm (TC)
Temperature range: 200’F-600’F/100’C-315’C
Touch the excellence: the G-PRIV 3 back panel adopts acrylic shell pattern panel with mellow and smooth texture, whose vibrant colors make the whole mod look more trendy and modern. Ergonomically designed chamfered edges reveal engineers’ attention to detail. The box mod fits perfectly on the palm for a comfortable grip.
Fast response to your need: G-PRIV 3 owns a 2.4″ super large colorful touch screen, which is quite responsive, most of the operations can be finished with a simple touch. Newly upgraded UI provides you more clear and detailed vaping information, such a s VW/TC MODE, vaping effect, voltage, battery life, etc. Besides, there are 6 theme colors available for screen settings.
IQ-G Chipset achieves performance: driven by a new intelligent IQ-G Chipset, G-PRIV 3 delivers fire new use interface and user experiences. With the 32-bit processor, it can power up to 230 watts and offer a flash fire speed up to 0.001s. The maximum current output can reach up to 50A.
230W max power output: powered by two 18650 batteries in series, G-PRIV 3 can reach up to the maximum output of 230W.
Secondary key simplifies screen lock/unlock: for some traditional mods, you need to press fire key for several times to lock/unlock the screen, while G-PRIV 3 simplifies the operation. With this independent button you can lock/unlock the screen easily (at the state of power on.)
Note: locking the fire key will lock the touch function simultaneously. To use the touch function again, you need to press and hold the secondary key for 2 seconds to unlock the touch function.
Press and hold the secondary key for 2 seconds to lock the screen, but you can still fire the device.
Fast press the fire key for three times, and then you cannot vape anymore with locked device; with another same operation, you can unlock the device and vape again.
More colorful, more outstanding: the decorative pattern of the rear panel uses the shell series: gold shell, purple shell, 7-color shell and brick red shell, symbolizing unremitting pursuit and powerful strength.
Battery replacement, convenient & safe: to perfect the connection between the back panel and battery case, the connected place adopts large-area strong magnetic adsorption, so you don’t have to worry about looseness and damage. What’s more, this makes battery replacement more convenient.
Note: cautions for battery use are displayed on the back side of the rear panel.
Faster transmission with USB-C port: G-PRIV 3 employs USB Type-C which can carry more power and offer faster transfer speed. It supports 2A super fast charge. Charge the device by connecting it to a computer or a wall charger via the included Type-C cable. Balance charging will be performed when the battery levels of two batteries vary greatly from each other.
Multiple protections: G-PRIV 3 provides multiple types of protections to avoid potential risks.
Intelligent atomizer recognition
Puff monitoring system
10 seconds cut-off
Short circuit protection
510 threading connection
Powered by dual 18650 batteries (batteries sold separately)