Vandy Vape Pulse AIO Kit


Pulse AIO Kit comes with a great of compatibility. The tank can work in most boro style mods. Most importantly, there is a DIY RBA Tank of 3.5ml capacity and a pre-built tank of 5ml capacity, which will satisfy your different vaping needs. The DIY RBA Tank is designed with curved airflow for large or small coils. The height of the positive table is adjustable. USB type-c charging will provide reliable power and smooth charging. Vandy Vape Pulse AIO Kit supports 21700, 20700 and 18650 (a 18650 adapter included) cell. You can customize button and plates easily for DIY fun. Pulse AIO Kit is compatible with VVC coils.


Vandy Vape Pulse AIO Kit gives all the DIY factors to bring you the fun of manual, which is boro compatible, and DIY RBA tanks work in most boro style modes. It is not much point in people who pursues a handy way to vape, yet if you prefer to build your kit, it is just the best way. The mesh pre-made coil tank has the curved airflow that is available for different sizes of the coil and supports both DIY and coil, press your coil into the tank, then open the plug to fill. The tank tends to be handier and lighter and set in the box-size kit. The adjustable positive pin can adjust the height of the positive table to fit the kit perfectly. Powered by a single 21700, 20700, or 18650 battery(not included) with a range of output that is up to 80W, it is admired that Pulse AIO considers all-around protection, such as temp control, voltage, bypass. Additionally, the USB type-c port provides reliable power and a faster speed to charge. Covering the sought-after texture, and matching your mood, DIY lovers should never miss it.

  • Boro compatible and tanks work in most boro style mods.
  • DIY RBA tank with curved airflow suitable for large or small coils.
  • Easy to customize button and plates.
  • 21700, 20700, and 18650 (w/adaptor) compatible. (battery sold separately)
  • DIY RBA tank with curved airflow, suitable for large or small coils.
  • Compatible with VVC coil
  • Type-C Charging: Pulsa AIO Kit adopts USB Type-C, which can provide reliable power and faster transfer speed to achieve smooth charging.
  • Power By An Upgraded Vandy Chip With Max Power 80W
    • Open Circuit Protection
    • Over-current Protection
    • 10 Seconds Cut-off
    • Short Circuit Protection
    • Over-temperature Protection
    • Low-battery Warning
  • Operating Voltage: 3.2-4.2V
  • Power Range: 5-80W
  • Maximum Output Current: 32A
  • Charging Input Voltage: 5±0.25V
  • Resistance: 0.05-3ohm
  • RBA Pod Capacity: 3.7ml
  • Pre-built Pod Capacity: 5ml
  • Charging Current: 1000mAh

Standard Edition Contents

  • 1*Pulse AIO Device
  • 1*Pulse Vessel RBA Tank
  • 1*Pulse Vessel Pre-built Tank
  • 1*Wrench
  • 2*VCC Coils
  • 2*24ga Ni80 Coil 0.4ohm
  • 1*Accessory Bag
  • 1*Coil Lead Guide
  • 1*QC Type-C USB Cable
  • 1*Instruction Manual
  • 1*18650 Battery Adaptor


There are no reviews yet.

Be the first to review “Vandy Vape Pulse AIO Kit”